maipu maipu

SEARCH
Switch > Aggregation Switch > MyPower S6600A Series L3 Distribution Routing Switch

MyPower S6600A Series L3 Distribution Routing Switch

MyPower S6600A is Maipu new multi-service distribution routing switch developed by Maipu. It adopts the ASIC+NP architecture design, provides the stable, reliable, and secure L2/L3 data wire-speed switching services for the next generation network, owns the advanced 1G/10G/40G Ethernet technology, supports various high-density interface board, and meets the high-density, high-throughput requirements of the distribution devices at the distribution layer. S6600A supports the chassis with 6 slots and 10 slots, respectively and provide the Tbps-level backplane bandwidth and switching capacity.

S6600A adopts the carrier-class reliability design and passive backplane technology and supports the control engine redundancy, switching engine redundancy, power and fan redundancy. All the modules support hot-swappable. Besides, it supports the STP/RSTP/MSTP/ERPS protocols to realize the link redundancy and ensure that the services are not disconnected when the network fails in various networking modes. S6600A provides rich functions. For example, the hardware supports IPv6; provides various IPv6 networking modes and service applications; supports L2/L3/star/ring/tree Metro-E networking technologies; provides complete QoS and multicast supporting technologies.

As the network distribution data switching platform, S6600A can cooperate with the other series switches of Maipu to provide a full range of MAN and LAN solutions for the sectors of operators, financial services, government, energy, transportation, education, military, large and medium-sized enterprises. 


Product Features

    Advanced hardware structure to ensure Tbps-level backplane and switching capacity

    MyPower S6600A switch adopts the ASIC+NP structure, provides passive copper backplane, realizes the intra-board and inter-board L2/L3 wire-speed distributed forwarding via Crossbar switching matrix, and performs high-speed route searching via powerful ASIC chip, thereby improving the forwarding performance and expanding capability greatly, reaching the Tbps-level backplane bandwidth and switching capacity, and providing advanced 1G/10G/40G Ethernet supporting, as well as high-density interface board to meet the high-density and high-throughput requirements of the devices at the distribution layer.

    Separated switching and control plane, ensuring no packet loss

    MyPower S6600A adopts the technology of separating the control card and the switching card. When the control card fails and performs the redundant switching, it does not affect the data forwarding of the switching card and the data of the service cards is still forwarded normally on the switching card, so as to reach the high-reliability requirement of no packet loss.

    Virtualization technology, achieve unified deployment and management

    MyPower S6600A supports VST management plane virtualization technology, including horizontal virtualization H-VST and virtualized deployment M-VST, it can realize high performance logical switch virtualized by more than one hundred different series of switches, for unified management and deployment.

    Easy management: The entire virtualization architecture shares one management IP address, simplify network topology and management, improve maintenance efficiency, highly reduce OPEX;

    Strong architecture: With distributed cross-device link aggregation technology, multiple uplinks share load and backup each other, to improve redundancy in the network structure and link resource utilization;

    High stability: Stacking to achieve local or remote function supports cross-device link bundling functionality to meet the core network links high-speed seamless switching needs.

    VxLAN/EVPN For Data Center Application

    S6600A supports VxLAN features which can realize centralized gateway and distributed gateway deployment, and supports BGP-EVPN protocol to dynamically establish VxLAN tunnels. With VxLAN Overlay technology, enterprises can build large Layer2 data center network to achieve smooth migration of virtual machines, save network repetitive construction costs, and improve network resource utilization efficiency.

    IPv4 & IPv6 dual stack

    S6600A supports IPv4/IPv6 dual protocol stack, supports multiple tunnel technologies, supports IPv6 static routing, RIPng, OSPFv3, BGP+, IS-ISv6, and IPv6 multicast, and satisfies IPv6 independent networking and IPv4/IPv6 Hybrid networking requirements.

    Stable core guarantee mechanism and the redundancy for key components to ensure the carrier-class reliability of the distribution devices

    All key components of S6600A provide the dual-redundancy or multi-redundancy. S6600A supports power redundancy, management module redundancy, switching matrix redundancy, and link redundancy. The power module, fan module, and all service cards of S6600A are hot-swappable, ensuring that the services are not interrupted forever. The special dual-engine backup design ensures the carrier-class reliability of the core switching platform.

     

    Perfect network security features ensure that the core devices can provide the complete anti-attack and anti-virus capability

    S6600A adopts excellent security design; supports SNMP V1/V2/V3 based on user security policy, MAC+IP+VLAN binding, and 802.1X authentication; supports the security policies such as anti network storm attack, anti DOS/DDOS attack, anti ARP attack, anti-scan pry attack, anti freaky packet attack, and anti network protocol packet attack to prevent attacks and virus efficiently. It is suitable for large-scale, multi-service, and complicated-flow networks.

    Wired and wireless integration design, meeting the deployment requirement of dual-network convergence

    Maipu S6600 adopts the wired and wireless integration design. With the CAPWAP-based wireless controller module, it meets the access management of the large-capacity wireless AP and wireless terminal, and also can carry the large-capacity data forwarding of the wired network, having the strong L2 and L3 wired device functions.

    Low-power consumption and lead-free ROSH design

    According to 10℃ rule, the reliability and life of semiconductor chip are related with working temperature. The working temperature increases 10℃ and the reliability of semiconductor reduces a half, while the working temperature and power consumption are in direct proportion. The maximum power consumption of MyPower S6600A series 10G distribution routing switch is lower than 1600W, while the lower-power consumption design of S6600A makes the temperature of the board card semiconductor chip lower. Therefore, the low-power consumption design improves the use life and stable running of high-end devices, saves the running energy consumption of devices, and meets the green environmental protection requirements.



Product Specifications

Product   model

MyPower   S6600A Series

Frame   model

S6600A-06

S6600A-10

Product   configurations

Device Structure

Chassis & Modular   Design

Physical Port

Rack/modular   distributed structure design

Control Engine Slots

2

2

Switching Engine Slots

2

2

Service Slots

4+2

8+2

Power Slots

4

4

Fan Slots

2

2

Console Port

2 (RJ45+USB)

2 (RJ45+USB)

Micro-SD Port

1

1

Out-band Interface

1*RJ45

1*RJ45

Hot Swap

Yes

Power Redundancy

Supports power supply   redundancy (N+M)

Performance   parameters

Switching Capability

2.56Tbps

5.12Tbps

Throughput

1905Mpps

3809Mpps

VLAN Entry

4K

Stacking

Yes

MPLS L3 VPN

Yes

VPLS L2 VPN

Yes

VxLAN/EVPN

Yes

MTBF

>200000 hours

Physical   index

Dimension (W×D×H)

441x434x488(mm)

441x434x666(mm)

Power   supply

Power Input

AC 100-240V, 50-60Hz

Power Module

AD1600-1D005M:1600W@16A

AD800-1D005M:800W@10A

Environment

Working Temperature

045

Power Surge

±6KV@1.2/50us

Anti-static

Contact   Electrostatic:≥6KV

Air Electrostatic:≥8KV

Humidity

1090%,   non-condensing

Host Weight

≤35Kg

≤30Kg

Software   Features

Standard L2 protocol

LAN

Port Type UNI/NNI, Port Speed, Port MTU,   Switch Port, Port Loopback, Port Energy Control, Port Isolation, Loopback   interface, Null interface

MAC address aging time, Mac address   learning on|off,  Mac address learning   limitation, Mac address VLAN bunding, MAC debug

VLAN, VLAN PVID, VLAN interface, VLAN   Tag/Untag, VLAN Trunk, MAC VLAN, Protocol VLAN, Subnet VLAN, Super VLAN,   Voice VLAN, VLAN Debug, QinQ, Selective QinQ, VLAN Mapping

STP/RSTP/MSTP, BPDU Guard, Flap Guard,   Loop Guard, Root Guard, TC Guard

G.8032(ERPSv1&v2)

Static Multicast, IGMP Snooping, IGMP   Snooping Proxy, MVR, MLD Snooping

LACP Link aggregation, LACP Port   Priority, LACP Load Balance, LACP Rate Monitor, LACP Debug

ULFD, Track, Loop Detection

VPN Technology

MPLS L3 VPN

LDP, MPLS BGP L3 VPN, MPLS OAM

Standard L3 protocol

Routing Protocol

Static Route, Static Route v6, RIP v1/v2,   RIPng, OSPFv2, OSPFv3, BGP, BGP4+, ISIS, ISISv6, VRRP, Policy Route, IP-VRF, Route   Map

BFD

BFD with Static|RIP|OSPF|BGP|ISIS

L3 Multicast

IGMPv1/v2/v3, PIM-SM, PIM-SSM

DHCP

DHCP Server, DHCP Client, DHCP Relay,   DHCP Snooping, DHCP Option43/60/82, DHCP Per VLAN

Stacking

VST

VST Member, VST Domain, VST Member   Priority, VSL Channel

MAD

MAD LACP, MAD Fast-hello

Network security

Port Security

Port Security On   aging|deny|permit|violation|ACL

Network Security

IP Source Guard, DHCP Snooping, Host   Guard, Dynamic ARP Inspection

Access Control List

Standard IP ACL, extended IP ACL,   standard MAC ACL, extended MAC ACL, Standard Hybrid ACL, extended Hybrid ACL,   Standard IPv6 ACL, extended IPv6 ACL

Anti-attack

Anti-attack detect|drop|flood|log, CPU   Protection

AAA

Authentication, Authorization, Accounting,   Radius, TACACS, 802.1x, Portal

QoS

Flow Classification

802.1P priority, DSCP priority

Traffic Speed Control

Rate Limit, Traffic Shaping

Congestion Management

SP, RR, WDRR, SP+WRR

Congestion Avoidance

Tail-drop, RED, WRED

Management

Network Management

SNMP v1/v2/v3, MIB,   RMON, SYSLOG, DNS, CLI, Telnet, FTP/TFTP, Debug

Network Monitoring

SPAN, sFlow, LLDP, IP-SLA

IEEE Standard

IEEE 802.3   (10BASE-T)           IEEE 802.3u (100BASE-T)

IEEE 802.3z   (1000BASE-X)      IEEE 802.3ab   (1000BASE-T)

IEEE 802.3ae (10G BASE-X)     IEEE 802.1x (port authentication) 

IEEE 802.3ad (Link Aggregation) IEEE 802.3x   (Flow Control)

IEEE802.3az (Energy Efficient Ethernet)

IEEE 802.1d (STP) IEEE 802.1Q (Virtual LAN)

IEEE 802.1w (RSTP) IEEE 802.1s (MSTP) 

IEEE 802.1p (Cos priority)



Order Information

Model

Description

MyPower S6600A   Series

Chassis and power   supply

S6600A-06

S6600A-06 chassis, two control engine slots,   two switching engine slots, four service slots, two fan slot, four power   slots.

S6600A-10

S6600A-10 chassis, two control engine slots,   two switching engine slots, eight service slots, two fan slot, four power   slots.

Control Engine

SM66A-MPUC

Control   Engine, supporting active/standby backup function (one is mandatory, 1+1   redundancy is optional)

Switching Fabric   Engine

SM66A-SFUC

Switching Engine, supporting active/standby   backup function (one is mandatory, 1+1 redundancy is optional)

SM66A-16GEF16XGEF-S-EC

SM66A-16GEF16XGEF-S-EC Switching Engine,   inbuilt 16-port 1000M optical interface, 16-port 10G SFP+ optical interface

SM66A-24GEF8XGEF-S-EC

SM66A-24GEF8XGEF-S-EC Switching Engine,   inbuilt 24-port 1000M optical interface, 8-port 10G SFP+ optical interface

Fan Modules

FAN-11A-01

FAN-11A-01 Fan module for S66A-06-MF

FAN-11B-01

FAN-11B-01 Fan module for S66A-10-MF

Power Modules

AD800-1D005M

AD800-1D005M,800W AC power module

AD1600-1D005M

AD1600-1D005M,1600W AC power module

Service Modules (Standard   L2&L3 Features)

SM66A-24GET24GEF2XF-EC

24-port 1000M Base-T electric interface,   24-port 1000M SFP optical interface,2-port 10G SFP+ optical interface

SM66A-48GET2XGEF-EC

48-port 1000M Base-T electric   interface,2-port 10G SFP+ optical interface

SM66A-48GETP2XGEF-EC

48-port 1000M Base-T electric   interface,2-port 10G SFP+ optical interface, PoE&PoE+ Enable

SM66A-48GEF2XGEF-EC

48-port 1000M SFP optical interface,2-port   10G SFP+ optical interface

SM66A-16XGEF-EC

16-port 10G SFP+ optical interface

SM66A-52XGEF-EC

52-port 10G SFP+ optical interface

SM66A-28GEF24XGEF-EC

28-port 1000M SFP optical interface,24-port   10G SFP+ optical interface

SM66A-36GEF16XGEF-EC

36-port 1000M SFP optical interface,16-port   10G SFP+ optical interface

SM66A-16XGEF4QXGE-EC

16-port 10G SFP+ optical interface, 4-port   40G QSFP optical interface

SM66A-24GET24GEF2XF-EC

24-port 1000M Base-T electric interface,   24-port 1000M SFP optical interface,2-port 10G SFP+ optical interface

Service Modules (Data   Center VxLAN Features)

SM66A-48GEF-DB

48-port 1000M SFP optical interface

SM66A-48GET-DB

48-port 1000M Base-T electrical interface

SM66A-24XGEF-DB

24-port 10G SFP+ optical interface

SM66A-24GEF24XGEF-DB

24-port 1000M SFP optical interface, 24-port   10G SFP+ optical interface

SM66A-48XGEF-DB

48-port 10G SFP+ optical interface

SM66A-48XGET-DB

48-port 10G Base-T electrical interface

SM66A-12QXGE-DB

12-port 40G QSFP optical interface

SM66A-16QXGE-DB

16-port 40G QSFP optical interface

SM66A-48GEF-DB

48-port 1000M SFP optical interface

SM66A-48GET-DB

48-port 1000M Base-T electrical interface

SM66A-24XGEF-DB

24-port 10G SFP+ optical interface

Multi-Service Card

SM66A-AC-A

Wireless Controller Module, 12*1000M Base-T,   8*1000M SFP, 2*10G SFP+