maipu maipu

SEARCH
Switch > Core Switch > MyPower S8900E Series Enterprise MPLS Core Switch

MyPower S8900E Series Enterprise MPLS Core Switch

MyPower S8900E is Maipu new multi-service MPLS core routing switch developed by Maipu. It adopts the ASIC+NP architecture design, provides the stable, reliable, and secure L2/L3 data wire-speed switching services for the next generation network, owns the advanced 1G/10G/40G/100G Ethernet technology, supports various high-density interface board, and meets the high-density, high-throughput and no-block switching requirements of the core devices at the core layer. S8900E provides the new-generation core data switching service technology for the enterprise network with the services as the core. It supports the chassis with four slots, ten slots, respectively and provide the Tbps-level backplane bandwidth and switching capacity.

S8900E adopts the carrier-class reliability design and passive backplane technology and supports the control redundancy, switching redundancy, and power redundancy. Its board card, fan, and power supply are hot-swappable. Besides, it supports the STP/RSTP/MSTP/ERPS/VRRP protocols to realize the link redundancy and ensure that the services are not disconnected when the network fails in various networking modes. S8900E provides rich functions. For example, the hardware supports IPv6; provides various IPv6 networking modes and service applications; supports L2/L3/star/ring/tree MAN networking technologies and various flow classification technologies, QoS technologies, and multicast supporting technologies.

As the network core data switching platform, S8900E can cooperate with the other series switches of Maipu to provide a full range of MAN, LAN, and WAN solutions for the sectors of operators, financial services, government, energy, transportation, education, military, large and medium-sized enterprises. It is widely used in the data center, production network core, district network core, and IP MAN core of the foregoing sectors.



Product Features

    Advanced hardware structure to ensure Tbps-level backplane and switching capacity

    MyPower S8900E adopts the ASIC+NP structure, provides passive copper backplane, realizes the intra-board and inter-board L2/L3 wire-speed distributed forwarding via Crossbar switching matrix, and performs high-speed route searching via powerful ASIC chip, thereby improving the forwarding performance and expanding capability greatly, reaching the Tbps-level backplane bandwidth and switching capacity, and providing advanced 1G/10G/40G/100G Ethernet supporting, as well as high-density interface board to meet the high-density and high-throughput requirements of the devices at the core layer.

    Separate the switching unit from the control unit, ensuring no packet loss

    MyPower S8900E adopts the technology of separating the control card and the switching card. When the control card fails and performs the redundant switching, it does not affect the data forwarding of the switching card and the data of the service cards is still forwarded normally on the switching card, so as to reach the high-reliability requirement of no packet loss.

    Support rich data center features

    MyPower S8900E core switch adopts SDN architecture design, supporting NETCONF interfaces to third-party software creating open programming mode. MyPower S8900E support VxLAN and EVPN technologies for large L2 data center network for the migration of virtual machines.

    Virtualization technology, achieve unified deployment and management

    MyPower S8900E core switch supports horizontal N:1 virtualization(H-VST) up to 4 devices and supports 128 vertical N:1 virtualization(M-VST).

    Easy management: The entire virtualization architecture shares one management IP address, simplify network topology and management, improve maintenance efficiency, highly reduce OPEX;

    Strong architecture: With distributed cross-device link aggregation technology, multiple uplinks share load and backup each other, to improve redundancy in the network structure and link resource utilization;

    High stability: Stacking to achieve local or remote function supports cross-device link bundling functionality to meet the core network links high-speed seamless switching needs.

    50ms network recovering capability, ensuring that the service is not disconnected forever

    50ms network recovering capability is the telecom network reliability requirement. S8900E realizes the Ethernet fast network recovering capability via the private technology EIPS so that the IP network fault recovering capability improves from tens of seconds to 50ms, ensuring that the service recovers fast and the service is online forever.

    High-performance 640G interface wire-speed service card, making the network architecture more simple

    The advanced Gigabit system design capability of S8900E realizes that the board supports high-density 1G/10G/40G wire-speed interfaces. As the network core switching platform, S8900E reduces the network hierarchy and network devices via high-density access capability, so as to make the network architecture simpler.

    Rich Ethernet OAM features, making Ethernet manageable

    S8900E supports IEEE802.1ag, IEEE802.3ah standard Ethernet OAM protocols so that Ethernet devices and Ethernet network have the link status, interface status, and network auto configured management capability. Moreover, S8900E provides IPFIX and SLA functions so that Ethernet has the complete promise service capability.

    Stable core guarantee mechanism and the redundancy for key components to ensure the carrier-class reliability of the core devices

    All key components of S8900E provide the dual-redundancy or multi-redundancy. S8900E supports power redundancy, management module redundancy, switching matrix redundancy, and link redundancy. The power module, fan module, and all service cards of S8900E are hot-swappable, ensuring that the services are not interrupted forever. The special dual-engine backup design ensures the carrier-class reliability of the core switching platform.

    Hardware supports distributed IPv6 wire-speed forwarding

    Each wire card of S8900E has the hardware IPv6 capability, including protocol/function processing, and data forwarding, which avoids the bottleneck and delay problems of the centralized forwarding, provides the strong guarantee for the large-scale commercial applications of IPv6, and meets the different IPv6 applications.

    Perfect network security features ensure that the core devices can provide the complete anti-attack and anti-virus capability

    S8900 adopts excellent security design; supports SNMP V1/2/3 based on user security policy, MAC+IP+VLAN binding, and 802.1X authentication; supports the security policies such as anti network storm attack, anti DOS/DDOS attack, anti ARP attack, anti-scan pry attack, anti freaky packet attack, and anti network protocol packet attack to prevent attacks and virus efficiently. It is suitable for large-scale, multi-service, and complicated-flow networks.

    Low-power consumption and lead-free ROSH design

    According to 10℃ rules, the reliability and life of semiconductor chip are related with working temperature. The working temperature increases 10℃ and the reliability of semiconductor reduces a half, while the working temperature and power consumption are in direct proportion. The maximum power consumption of MyPower S8900E series core switch is lower than 1800W, while the lower-power consumption design of S8900E makes the temperature of the board card semiconductor chip lower. Therefore, the low-power consumption design improves the use life and stable running of high-end devices, saves the running energy consumption of devices, and meets the green environmental protection requirements.

Product Specifications

Product

MyPower S8900E Series

Chassis

SM8900E-06

SM8900E-10

SM8900E-08

SM8900E-12

Chassis   configuration

Structure

Rack/modular   distributed structure design

Control Engine Slots

2

2

2

2

Switching Fabric   Slots

2

2

4

4

Service Slots

6

10

8

12

Power supply Slots

4

4

4

8

USB

1

1

1

1

SD Slot

1

1

1

1

Console

2(RJ45+USB)

2(RJ45+USB)

2(RJ45+USB)

2(RJ45+USB)

Reset

1

1

1

2

CMM

1

1

1

2

Out-Band Management

1

1

1

1

FAN Array

2

2

2

4

Average non-fault   time

>200,000 hours

Standards   & protocols

Main Protocol

802.1X, VLAN, PVLAN, STP, RSTP, MSTP, port mirroring, IGMP Snooping, GVRP, Broadcast Storm Control, QINQ, VLAN Translation, Port binding, address   filter, supports cross-board port/flow mirroring, supports RSPAN, IP-based   ACL, MAC-based ACL, MAC+IP-based ACL, and Jumbo Frame

50ms ring protection

ERPS

MPLS VPN

LDP,   MPLS L3 VPN, MPLS QoS, MPLS FRR

IPv4 Routing   Protocols

Static   route, RIPv1/v2, OSPF, BGP4, ISIS, IGMP, PIM-SM, PIM-DM, MBGP, VRRP,   equivalent route, policy route, Graceful Restart

IPv6 Main Protocols

IPv4/IPv6   dual stack, TCP6, UDP6, RawIP6, Pingv6, TraceRoute6, Telnet6, FTP6, TFTP6,   DNS6, ICMPv6, VRRPv3, DHCP6, ND, PMTUD,

RIPng,   OSPFv3, IS-IS6, BGPv4+, IPv6 static routing, IPv6 policy routing

QoS

Supports   Diff-serv/QOS, flow monitoring (CAR), SP, WRR, SP+WRR queue scheduling   algorithm, 802.1P/DSCP/TOS, Queue scheduling mechanism, Two rate Three color   (trTcm)

Upper layer   application

DHCP/DHCP Option82/DHCP Relay/DHCP Snooping,   IGMPv1/v2/v3, IGMPv1/v2/v3 Snooping, PIM-SM/PIM-DM/PIM-SSM

Security mechanism

SSH,   ACL flow filtering mechanism, ACL, ARP, SNMPv3, Radius user-graded login   authentication, TACACS+, access table host access control, data log, IP   address/VLAN ID/MAC address/port binding, packet filtering, packet filtering   of application layer

Data Center Features

VxLAN,   E-VPN, Netconf

OAM

802.3ah OAM802.1ag   OAM

System management

SHELL,   TELNET, FTP, SNMP V1/V2/V3, IP-SLA, TR069, Network management software,   Third-party software, IPFIX (Netflow), NTP clock

Reliability


BFD   for BGP/IS-IS/OSPF/RSVP/VPLS PW/VRRP, Keepalive gateway, Smart link, VRRP,   VRRPv3, VRRP, IP FRR, TE FRR, ISSU

Virtualization

Stacking

H-VST   Virtualization (4:1)

M-VST   Virtualization (128:1)

VSD   Virtualization (1:2)

IEEE standards

IEEE   802.3z (1000BASE-X)   IEEE 802.3ab   (1000BASE-T)

IEEE   802.3ae (10G   SFP+)    IEEE 802.3ba (40G QSFP)

IEEE   802.1ad (Q-in-Q)         IEEE 802.3x   (Flow Control)

IEEE   802.3ad (Link Aggregation)    IEEE   802.1x (port authentication)

IEEE 802.1d (STP)      IEEE 802.1Q (Virtual LAN)

IEEE 802.1w (RSTP)    IEEE 802.1s (MSTP) 

IEEE 802.1p (COS priority)    IEEE 802.3az EEE

Physical   index

Dimension (W×D×H)

441x434x488

(11U)

441x434x666

(15U)

442x645x666mm

(15U)

442x645x841mm

(19U)

Power   Supply

Input voltage (AC)

100-240V, 50-60Hz

Environment   Parameters

Working temperature

0~50

Working humidity

5-95% no-condensing



Order Information

Model

Description

MyPower S8900E   Series

Chassis and power   supply

SM8900E-06/10

SM89E-06-MF

SM8900E-06   chassis, two control engine slots, two switching engine slots, six service   slots, two fan slot, four power slots.

SM89E-10-MF

SM8900E-10   chassis, two control engine slots, two switching engine slots, ten service   slots, two fan slot, four power slots.

SM89E-MPUC

SM89E-MPUC   Control Engine, supporting active/standby backup function (one is mandatory,   1+1 redundancy is optional)

SM89E-SFUD

SM89E-SFUD   Switching Engine, for SM8900E-06&10

FAN-11A-01

FAN-11A-01   Fan module for SM89E-06-MF

FAN-11B-01

FAN-11B-01   Fan module for SM89E-10-MF

SM8900E-08/12

SM89E-08-MF

SM8900E-08   chassis, two control engine slots, four switching engine slots, eight service   slots, two fan slot, four power slots.

SM89E-12-MF

SM8900E-12   chassis, two control engine slots, four switching engine slots, twelve   service slots, four fan slot, eight power slots.

SM89E-MPUB

SM89E-MPUB   Control Engine, supporting active/standby backup function (one is mandatory,   1+1 redundancy is optional)

SM89E-SFUG

SM89E-SFUG   Switching Engine, for SM8900E-08

SM89E-SFUB

SM89E-SFUB   Switching Engine, for SM8900E-12

FAN-15A-01

FAN-15A-01   Fan module for SM89E-08

FAN-19A-01

FAN-19A-01   Fan module for SM89E-12

Power Module

AD800-1D005M

AD800-1D005M,800W   AC power module

AD1600-1D005M

AD1600-1D005M,1600W   AC power module

Service Modules

EA Modules   (Complete L2&L3 Features)

SM89E-48GEF2XGEF-EA

48-port   1000M optical interface,2 port 10G optical interface

SM89E-48GET2XGEF-EA

48-port   1000M electric interface,2 port 10G optical interface

SM89E-24GET24GEF2XGEF-EA

24-port   1000M optical interface,24-port 1000M electric interface,2 port 10G optical   interface

SM89E-48GETP2XGEF-EA

48-port   1000M electric interface,2 port 10G optical interfacePoE&PoE+   Enable

SM89E-16XGEF-EA

16-port   10G Ethernet interface

SM89E-16XGEF4QXGE-EA

16-port   10G Ethernet interface and 4-port 40G Ethernet interface board

SM89E-52XGEF-EA

52-port   10G Ethernet interface

DB Modules   (Complete L2&L3 Features, VxLAN)

SM89E-48GEF-DB

48-port   1000M SFP optical interface

SM89E-48GET-DB

48-port   1000M Base-T electrical interface

SM89E-24XGEF-DB

24-port   10G SFP+ optical interface

SM89E-24GEF24XGEF-DB

24-port   1000M SFP optical interface, 24-port 10G SFP+ optical interface

SM89E-48XGEF-DB

48-port   10G SFP+ optical interface

SM89E-48XGET-DB

48-port   10G Base-T electrical interface

SM89E-12QXGE-DB

12-port   40G QSFP optical interface

SM89E-16QXGE-DB

16-port   40G QSFP optical interface

SM89E-4QFP-DB

4-port   100G QSFP28 optical interface

SM89E-48GEF-DB

48-port   1000M SFP optical interface

SM89E-48GET-DB

48-port   1000M Base-T electrical interface

SM89E-24XGEF-DB

24-port   10G SFP+ optical interface

SM89E-24GEF24XGEF-DB

24-port   1000M SFP optical interface, 24-port 10G SFP+ optical interface

Value Added   Modules

SM89E-AC-A

Wireless   Controller Module, 12*1000M Base-T, 8*1000M SFP, 2*10G SFP+

SM89E-FW-A

Firewall   Module, 4*1000M Base-T, 4*1000M SFP

Stacking Cable

SFP-STACK-15

High   speed stacking cable, SFP+ to SFP+,10Gbps, L=1.5m

SFP-STACK-30

High   speed stacking cable, SFP+ to SFP+,10Gbps, L=3.0m

SFP-STACK-50

High   speed stacking cable, SFP+ to SFP+,10Gbps, L=5.0m

QSFP-STACK-10

High   speed stacking cable, QSFP+ to QSFP+,40Gbps, L=1.0m

QSFP-STACK-30

High   speed stacking cable, QSFP+ to QSFP+,40Gbps, L=3.0m

QSFP-STACK-50

High   speed stacking cable, QSFP+ to QSFP+,40Gbps, L=5.0m