maipu maipu

SEARCH
Unified Communication > Voice Gateway > VG6000 Series VoIP Gateway

VG6000 Series VoIP Gateway

MyPower VG6500 is a large-sized VoIP gateway. It adopts full modular design and supports access port type, port quantity, and processing capability configuration as required. MyPower VG6500 also supports board card hot plugging, dual power redundancy, 1:1 binding network, and escape in case of power down. It supports up to 4-channel E1 trunk and 448-line simulation access capacity.

MyPower VG6000 is a medium-sized VoIP gateway. It adopts full modular design and supports abundant routing and switching design. MyPower VG6000 supports access port type, port quantity, and processing capability configuration as required and also supports board card hot plugging, dual power redundancy, 1:1 binding network, and escape in case of power down. It supports up to 4-channel E1 trunk 96-line simulation access capacity. 


Product Features

    Support 3GPP SIP protocol and interconnection with mainstream IMS and provide voice, data, and video service.

    Enable the VoIP to reach the PSTN reliability by specific smart route and 1:1 binding network technology

    Bring high-quality application experience for users by integrated call quality improvement mechanism

    Provide flexible call policy setting without changing original phone number and calling habit.

    Support abundant carrier-level supplementary service.

    Support the FXS and FXO port state link.

     

    Leading technology

    MyPower VG6500 and VG6000 series VoIP gateway supports SIP protocols and adopts soft switching architecture. It can realize core control functions, such as call routing, user configuration management, user access control, and user authority management, and value-added service. Meanwhile, the VoIP gateway adopts mass of access modules to access common simulation call directly to the VoIP network.


    Open service architecture

    MyPower VG series VoIP gateway can be compatible with the devices of the current mainstream SIP server manufactures. It realizes IP voice, data, and fax service, and provides common value-added service. Thus, it can provide efficient communication experience for users.


    Modular design

    MyPower VG6500 and VG6000 series VoIP gateway adopts modular hardware design and configures the product service port type, port quantity, and processing capability. It supports the user to customize the VoIP system as required by current network architecture and construction requirement. This can protect the current investment, reduce construction and upgrade version.


    Rich value-added functions

    MyPower VG series VoIP gateway supports PSTN additional service and featured value-added service. It greatly improves the customer work efficiency and VoIP system value.

     

    Web-based management maintenance mode

    MyPower VG series VoIP gateway provides Telnet Shell remote configuration, maintenance, and device upgrade and also provides abundant log information to help administrator locate, analyze, and troubleshoot the fault.



Product Specifications

Hardware Specification


MyPower VG M6500

MyPower VG M6000

Product configuration

10/100M Ethernet interface

2

2

Console

1

1

Number of slots

16

4

System interface

Simulation interface

FXS, FXO

FXS/FXO binding

Support

Support

Digital trunk interface (exclusion of trunk card)

0/2/4 E1

0/2/4 E1

Protocol

Ethernet interface

IEEE 802.2 (LLC), IEEE 802.3 (Ethernet)

E1 interface

ITU-T G.703 (1999)

Signaling trunk protocol

CAS: Analog CO Trunk, CCS: ISDN PRI (AT&T Custom, NI-1 and NI-2)

VoIP key protocols

SIP, T38, RFC2833

Voice coding

G.711, G.723, G.729

Compressed voice transmission

RTP/RTCP

Management mode

SNMP, Web, shell

Echo suppression

G.168—2000 compliant

Voice activation/Comfort noise

VAD/CNG

Signaling detection and generation

DTMF

System performance

Long call/Long call retention rate

> 99%

Multichannel call completing rate

> 90%

Call performance

BHCC ≥ 54,000, call setup time ≤ 2.5s

Physical index

H x W x D (mm)

400 x 440 x 344

125.6 x 482.6 x 312.5

Power requirements

AC input voltage

100 — 240V

100 — 240V

DC input voltage

--

-40 to -57V

Frequency (Hz)

50 — 60Hz

50 — 60Hz

Maximum power consumption (W)

800W

300W

Environmental parameter

Long-term work temperature

15 — 30 ℃

Short-term work temperature

 0 — 40 ℃

Long-term work humidity

40% — 65%, non-condensing

Short-term work humidity

0% — 90%, non-condensing

Software feature

Network protocol

SIP

SIP 2.0

3GPP Release 10

Media transmission

RTP

RTCP

IP application

DHCP

DNS

FTP

Ping, Trace

Coding capability

g.729

g.729

g.729a

g.729wb

g.723

g.723.1

g.711

g.711A

g.711U

Key functions

Call pick-up

Phone subscriber configuration

Caller display and identification

Call forwarding

Call forwarding (call forwarding on busy, call forwarding no reply, call forwarding unconditional)

Call waiting

Hotline dialing

Busy tone automatic identification

Secondary dialing

IVR record


Order Information

Product Model

Description

MyPower VG M6500

VG M6500 host chassis, including host structure, backplane, one fan slot, providing 2 control engine slots and 14 service slots, one fixed DC power supply, if AC power is required, need configure external AC power supply PCR01-48/20

MyPower VG M6000

VG M6000 voice gateway chassis, 4 slots, 2 power supply module slots, build-in Fan module

VM6000-4E1MPUH

Control card, with 4 E1 trunk interfaces, 1 Console, and 2 Ethernet interfaces. The card must be configured with the DSP card.

VM6000-2E1MPUH

Control card, with 2 E1 trunk interfaces, 1 Console, and 2 Ethernet interfaces. The card must be configured with the DSP card.

VM6000-MPUH

Control card, with 1 Console, 2 Ethernet interfaces. The card must be configured   with the DSP card.

VM-32FXSH

Service card, with 32-channel FXS access, supporting hot plugging.

VM-16S16OH

Service card, with 16-channel FXS access and 16-channel FXO access, supporting hot plugging.

VM-1DSPA

DSP module, using with the control card and supporting 3 to 64 voice channels.

VM-1DSP

DSP module, using with the control card and supporting 80 to 256 voice channels.

PCR01-48/20

AC power, applicable to VG6500

VM6500-FANH

Fan module, applicable to VG6500

AD150-1S007W1

AC power, applicable to VG6000

DD150-5S007J1

DC power, applicable to VG6000