• EG100 High-speed Modem Access Bridge

  • Download PDF file

    EG100 is a high-speed, remote, desk digital loop access bridge researched and developed by Maipu (Sichuan) Communication Co., Ltd. EG100 provides two 10/100M auto-adapting Ethernet ports and one 2M G.SHDSL interface, which in pairs interconnect two LANs.


    EG100

    • Copper-wire-based broadband IP transmission
    • Excellent transmission performance
    • Favorable price performance
    Key Features
    • Optional rate
      • EG100 supports N 64Kbps (N=132), CAS/CCS frame modes.
    • Faster distance
      • The transmission distance reaches 3.26.2Km for 0.4mm passive wire.
    • Strong adaptability of Ethernet interface
      • Ethernet interface supports 10/100M auto-adapting rate, full-duplex/half-duplex auto-adaptive and cross/straight auto-adaptive
      • Supports MAC and update function, and MAC can reach 2K
      • Supports at most 1536bytes, full-duplex 802.3X flow control mode and half-duplex mode
    • Advantage technology
      • Adopts advanced digital signal processing technology (auto-adoptive and auto-adoptive echo counteracting)
      • Ultra-large scale integrated circuit technology with high reliability and good stability
    • Good price-performance ratio
      • Applies in non-loading loop, and doesnt need the line repeater and correlative equipment, project design and cable construction
      • Reduces project investment
    • Smartly use
      • Provides kinds of telecommunication service on the cables according to the need
      • Easy installation and elimination
    • Good performance
      • The error bit ratio is less than 10-7 and approaches to optical fiber system transmission quality, which applies to voice, data and image kinds of telecommunication business
    • Choice timer
      • Configuration of inset timer or DSL line timer
    • Good maintenance
      • EG100 offers strong performance monitoring, diagnosis and maintenance management function
      • Users conveniently know the equipment operation condition, wire failure and Ethernet failure condition from the equipment board
      • When system fails, loop testing helps define the failure
    • Easy upgrade
      • Computer serials update system program.
    Technical Specifications

    Performance index

    • DSL interface
      • In accordance with ITU-T G.991.2 standard
      • Line rate up to 2320Kbps (a pair of lines)
      • Interface of external cable: a pair of 2-core passive twisted-pair cables, RJ45 plug
      • Line coding: TC-PAM16
      • Line impedance: 135
      • Signal level: +13.50.5dBm
      • Error bit ratio: 10-7
      • The transmission distance when without trunk: 3.26.2Km (0.4mm wire)
    • Ethernet interface
      • Interface standard: IEEE802.3 (10Base-T), IEEE802.3u (100Base-TX), IEEE802.1Q
      • Interface rate: 10/100Mbps auto-adapting, half/full duplex auto-sense
      • External line: UTP5, RJ45 jack
      • Line impedance: 120
    • Console port
      • Interface rate: 115200bps
      • Interface type: asynchronous serial-port mode, RJ45 jack
      • Interface standard: RS-232
    • Testing
      • Local-end analog-loop testing
      • Local-end digital-loop testing
      • Remote-end digital-loop testing
    • Physical index
      • Dimension: H*W*Dmm3: 30 121190
      • Weight: about 0.5Kg
    • Environment parameters
      • Temperature: 0C +40C
      • Humidity: 090%
    • Power supply
      • Input voltage: (AC) 90V~265V
      • Input current: 0.1A
      • Whole power8.5W
    Model Application

    The figure illustrates using two EG100 to connect two LANs, and also through MP94GHDSL to complete the connection.

  • Print this page    E-mail this page
߿ͷ
߿ͷϵͳ