

|
Item |
Description | |||||||
|
Product configuration | ||||||||
|
Product model |
Console port |
Service module slot |
Power module slot |
Fan slot |
SNA/IPsec jack |
Control card slot | ||
|
MP3740 |
1 |
4 |
2 |
1 |
1 |
1 | ||
|
MP3780 |
1 |
8 |
2 |
1 |
1 |
1 | ||
|
Performance parameters | ||||||||
|
Control card type |
RM3A-MPU204C-1GE1FE series |
RM3A-MPU206-2GE series | ||||||
|
Processor |
High-speed MIPS processor |
High-speed MIPS processor | ||||||
|
Flash |
Default: 16MB
Expandable to 80MB |
Default: 16MB
Expandable to 80MB | ||||||
|
Memory (DDR SDRAM) |
Default: 128MB DDR333
Expandable to 1GB DDR333 |
Default: 128MB DDR333
Expandable to 1GB DDR333 | ||||||
|
Throughput |
600Kpps |
1Mpps | ||||||
|
MTBF (mean time between failures) |
100000 hours | |||||||
|
Bus bandwidth |
2G bps | |||||||
|
Maximal route table capability |
63000 entries/256MB
320000entries/1GB memory | |||||||
|
Maximal access list capability |
250000 entries | |||||||
|
1518-byte delay |
6¦Ìs | |||||||
|
Standards & protocols | ||||||||
|
Link protocol |
PPP, SLIP, SDLC, FR, LLC2, ISDN, X.25, HDLC, LAPB, Ethernet_II, Ethernet_SNAP, 802.1Q | |||||||
|
Network protocol |
TCP/IP, ICMP, UDP, FTP, TFTP, SNMP, TELNET, RLOGIN, DHCP, HTTP, DNS, ARP, DLSw, IPv6 | |||||||
|
Routing protocol |
Static routing protocol, RIPv1, RIPv2, OSPF, BGP, DDR, NDSP, IRMP, SNSP, IGMP, DVMRP, PIM-SM/DM, IS-IS | |||||||
|
Network security |
PPP encryption, L2TP, GRE, policy routing, AAA, IPsec, IKE, PKI, CA, MPLS L2/L3VPN, SSH, SNMP V3 | |||||||
|
QoS |
FIFO, PQ, CQ, FQ, WFQ, CBWFQ, LLQ, RSVP, CAR, SPD, WRED, traffic-shaping | |||||||
|
Physical indices | ||||||||
|
Details |
MP3740 |
MP3780 | ||||||
|
Dimension (H x W x D) |
100mm x444mm x 360mm |
155mm x444mm x 360mm | ||||||
|
Weight |
12.5KG(full-load) |
20KG (full-load) | ||||||
|
Power requirements | ||||||||
|
Input voltage (AC) |
Voltage: 100~240V
Current: 1.2A
Frequency: 50/60Hz | |||||||
|
Power consumption |
200W | |||||||
|
Input voltage (DC) |
Voltage: -40~-57V
Current: 4.6A | |||||||
|
Power consumption |
200W | |||||||
|
Environmental parameters | ||||||||
|
Short-term operation temperature |
0~40 | |||||||
|
Long-term operation temperature |
15~30 | |||||||
|
Short-term operation relative humidity |
10~90%
Non-condensing | |||||||
|
Long-term operation relative humidity |
40~65%
Non-condensing | |||||||
|
Product model |
Description |
|
MP3780 |
Default configuration: MP3780 chassis (eight slots), one fan module (RM3780-FAN), one power module (AD230-1T004), one RM3A-MPU204E-2GE control module (comprising two fixed 1000Mbps electric Ethernet ports and two fixed slots for 1000Mbps SFP optical modules, 16MB flash and 128MB RAM memory and DDR266 memory) |
|
MP3740 |
Default configuration: MP3740 chassis (four slots), one fan module (RM3740-FAN), one power module (AD250-1T004), one RM3A-MPU204E-2GE control module (comprising two fixed 1000Mbps electric Ethernet ports and two fixed slots for 1000Mbps SFP optical modules, 16MB flash and 128MB RAM memory and DDR266 memory.) |
|
Chassis | |
|
RM3780-MF |
MP3780 chassis (eight module slots, one control slot, two power slots, one fan slot) |
|
RM3740-MF |
MP3740 chassis (four module slots, one control slot, two power slots, one fan slot) |
|
Fan | |
|
RM3780-FAN |
MP3780 FAN |
|
RM3740-FAN |
MP3740 FAN |
|
Control card | |
|
RM3A-MPU204C-1GE1FE |
Control module. Fixed 16M flash, one flash slot, two memory slots; one 10/100M Ethernet interface (electric interface), one 10/100/1000M Ethernet interface (electric interface and SFP slot). The electric interface and optical interface operate exclusively. |
|
RM3A-MPU206-2GE |
Control module, two fixed 10/100/1000M electric Ethernet interfaces and two 1000M optical module slots, 16M flash memory, one flash slot, two memory slots. The user purchases module according to needs, but the same port''s optical interface and electric interface cannot be used at the same time. |
|
Power supply | |
|
AD230-1T004 |
AC power supply module, each MP3700 chassis supports two power supply modules for backup mutually -- suitable for MP3780. |
|
AD250-1T004 |
AC power supply module, each MP3700 chassis supports two power supply modules for backup mutually -- suitable for MP3740. |
|
DD250-5T0041 |
DC power supply module. Each MP3600 chassis supports two power supply modules for backup mutually -- suitable for MP3780. |
|
DD250-5T0042 |
DC power supply module. Each MP3600 chassis supports two power supply modules for backup mutually -- suitable for MP3740. |
|
FLASH | |
|
FLASH8M-D168-64 |
8MBFlash card (8MB, 168 pins, 32-bit data) |
|
FLASH16M-D168-64 |
16MBFlash card (16MB, 168 pins, 32-bit data) |
|
FLASH32M-D168-64 |
32MBFlash card (32MB, 168 pins, 32-bit data) |
|
FLASH64M-D168-64 |
64MBFlash card (64MB, 168 pins, 32-bit data) |
|
Memory | |
|
DDR333-128D |
Memory: 128MB
Access speed: 266 MHz |
|
DDR266-256D |
Memory: 256MB
Access speed: 266 MHz |
|
DDR266-512D |
Memory: 512MB
Access speed: 266 MHz |
|
Module | |
|
RM3A-4SAH |
Four-port synchronous/asynchronous serial-port module (supports hot-swappable) |
|
RM3A-4E1H |
Four-port non-channelized E1 module (supports hot-swappable) |
|
RM3A-8E1H |
Eight-port non-channelized E1 module (supports hot-swappable) |
|
RM3A-4CE1H |
Four-port channelized E1/ ISDN PRI module (supports hot-swappable) |
|
RM3A-8CE1H |
Eight-port channelized E1/ ISDN PRI module (supports hot-swappable) |
|
RM3A-2FEH |
Two-port 100Mbps Ethernet module (supports hot-swappable). The module provides two 100M/10M electric Ethernet interfaces and two slots for 100Mbps SFP optical module slot. The electric interface and optical interface operate exclusively. |
|
RM3A-1ATM-OC3H |
One-port 155M ATM module (155M SFP optical module is required, supports hot-swappable) |
|
RM3A-1POS-OC3H |
One-port 155M POS module (155M SFP optical module is required, supports hot-swappable) |
|
RM3A-1CPOS-OC3H |
One-port 155M CPOS module (155M SFP optical module is required, supports hot-swappable) |
|
RM3A-4M336H |
Four-port frequency-band MODEM module (supports hot-swappable) |
|
RM3A-16AH |
Sixteen-port asynchronous interface module (supports hot-swappable) |
|
RM3A-8AH |
Eight-port asynchronous interface module (supports hot-swappable) |
|
Optical module | |
|
SFP-S2-L03P3 |
The 155M single mode optical module (transmission distance: 20km, LC interface, PECL interface level, wavelength: 1310nm) adopts to RM3A-1ATM-OC3H, M3A-1POS-OC3H, RM3A-1CPOS-OC3H RM3A-2FEH. |
|
SFP-M2-L03P8 |
The 155M multi-mode optical module (transmission distance: 2km, LC interface, PECL interface level, wavelength: 850nm) adopts to RM3A-1ATM-OC3H, M3A-1POS-OC3H, RM3A-1CPOS-OC3H RM3A-2FEH |
|
SFP-S2-L24P3 |
The 1.25G single mode optical module (transmission distance: 20km, LC interface, LC interface, PECL interface level, wavelength: 1310nm), adapts to controller card. |
|
SFP-M1-L24P8 |
1.25G multi-mode optical module (transmission distance: 550m, LC interface, PECL interface level, wavelength: 850nm) adapts to controller card. |
|
SNA/IPsec jack | |
|
SNA |
SNA chip |
|
IPsec |
IPsec chip |
|
IPsec + SNA |
IPsec + SNA chip |



