Chinese  [ 中 文 ]
  • MP7500 Core Router

  • The MP7500 series router is a core aggregation router designed and developed on the lines of Advanced Telecom Computing Architecture (ATCA) for efficient large-scale WAN core aggregation and core uplink connection. It provides super large-scale Internet access platform.
     
    The MP7500 router provides two control slots and eight MIM slots. It supports 32-port 155M interface or 256-port E1 interface with 12Mpps throughput. MP7500 incorporates four-core processors based on the technology of dual-core processors. The perfect dual-redundant or multi-redundant design guarantees high reliability of the router.
     
    The MP7500 router adopts MyPower-R software providing routing, backup, network security service, IP multi-cast function QoS, network management function, protocols of network layer and link layer, BGP edge network gateway protocol and MPLS function. It can be used as PE or P node.
    MP7500 SERIES ROUTER
     
     

    Key Features

     
    Four-core processing technology
    The router adopts advanced multi-core processing technology for separation of data forwarding platform and protocol control platform via distributed processing. It provides load balance of data forwarding platforms. The MP7500 router''s forwarding capability reaches 12Mpps with 32 155M interface and 256E1 interface to satisfy over 2000 2M network aggregation.
     
    Telecom-grade reliability
    The router is the first core router based on ATCA providing telecom grade reliability. The router provides independent system management and the multi-core processing technology for separation of data forwarding platform, protocol control platform and system management platform increasing reliability of system operation. It provides dual-redundancy or multi-redundancy design (dual-control, dual-fan, three power supply, double star data bus, double management bus, double Monitor ROM, double memory and double Flash).
     
    Dual-control redundancy & dual-router in single box
    The design facilitates dual-router in single box. One dual-control MP7500 is considered as two independent routers. It realizes dual-link redundancy backup and load balance.
     
    320G backboard with distributed & integrated infrastructure
    The router provides 40Gbps backboard bandwidth for each slot, which makes the total bandwidth to 320Gbps and realizes the distributed and integrated infrastructure.
     
    Patented virtual routing switching technology
    The router supports Maipu patented routing switching technology. WAN interface such as E1 or channels such as CPOS channel can be divided into virtual Ethernet ports, and the number of channels of single reaches to 252. This provides service hardware isolation and bandwidth guarantee.
     
    Low power consumption & stable operation
    The power consumption by router is lower than 400w. The router offers stable operation of high-end equipment.
     
    LCD screen and alarming maintenance
    The router provides LCD screen at the top, which displays system temperature, CPU usage and memory occupancy. By using shortcut keys beside LCD, the control card, line card and interface status can be checked.
     
    IPV6 protocol & software functions
    The router supports IPV6 protocol, BGP, MPLS and L2TP which can be used for deploying Layer 2 and Layer 3 VPNs. The features include ACL package-filtering, NAT, authentication audit, routing check, callback and service protect refuse. It provides integrated service and division service, supports RSVP, CAR, FIFO, PQ, FQ, CBWFQ, LLQ, SHELL, WEB, SNMP (SNMP V3 protocol). The Maipu Masterplan platform performs network configuration, network monitor, statistic, accounting and maintenance.
     
    Radiation system design
    The router provides standard 14U screen electromagnetic radiant chassis, which can be deployed on standard rack with features of anti-shake, anti-high and low temperature and anti-electromagnetic radiation. It provides 200W radiation capability based on ATCA and three power supply interfaces for 1+1 and 2+1 power supply redundancy backup. It supports hot-swap guaranteeing reliability and maintenance.
     

    Technical Specifications

     
    Item       
    MP7500
    Product configuration
    MIM
    8
    Control slot
    2
    Power supply slot
    3
    Fan slot
    2
    Performance
    Processor
    High performance multi-core processor
    Memory
    Fixed 64Mbytes extending to 1Gbytes via CF
    Memory (DDR SDRAM)
    512Mbytes by default extending to 1Gbytes
    Throughput
    12Mpps
    Average non-malfunction time
    100000h
    Bus bandwidth
    320Gbps
    Maximum routing table capacity
    440K (memory is 1Gbyte)
    Maximum ACL
    number
    50K (memory is 1Gbyte)
    Standards & protocols
    Link protocol
    PPP, FR, HDLC, Ethernet_II, Ethernet_SNAP, 802.1Q
    Network protocol
    IPV6, TCP/IP, ICMP, UDP, FTP, TFTP, SNMP, TELNET, RLOGIN, DHCP, HTTP, DNS, ARP, IPv6
    Routing protocol
    Static routing, RIPv1, RIPv2, OSPF, BGP, DDR, IGMP, DVMRP, PIM-SM/DM, IS-IS
    Network security
    PPP encryption, L2TP, GRE, policy routing, AAA, MPLS L2/L3VPN, SSH, SNMP V3
    QoS
    FIFO, PQ, FQ, WFQ, CBWFQ, LLQ, RSVP, CAR, SPD, traffic-shaping
    Physical index
    Dimension
    576 mm x 482.6 mm x 420mm
    Weight
    50Kg (full slot)
    Power supply requirement
    Input voltage (AC)
    Voltage: 100~240V
    Current: 1.2A
    Frequency: 50~60Hz
    Single power
    350W
    Power (maximum)
    3x350W
    Input voltage (DC)
    Voltage: -40~-57V
    Current: 4.6A
    Single power
    350W
    Power (maximum)
    3x350W
    Environment
    Short-term working temperature
    0~40
    Long-term working temperature
    15~30
    Short-term humidity
    10~90%. Non-condensing
    Long-term humidity
    40~65%. Non-condensing

     

    Order Information

     
    Product model
    Description
    Chassis
    MP7508-MF
    Core aggregation router chassis, eight service module slots, two fan slots, three power supply slots and LCD screen.
    Control module
    RM7B-MPU408-4GEH
    Control module for MP7500, four fixed 10/100/1000M adaptive Ethernet
    electric interfaces and four 1000M SFP optical module jack. These two
    interfaces cannot be used at the same time. Fixed 64Mbytes FLASH,
    one CF card slot extending to 1Gbytes via CF. Two memory slots
    Fan module
    RM7508-FANH
    Fan module (we suggest adopting dual-fan for backup)
    Power supply module
    DD400-5S005A
    DC power supply module (backup supports 1+1 or 2+1 solution, 2+1
    Backup is adopted for 4 line card)
    AD400-1S005V
    AC power supply module (backup supports 1+1 or 2+1 solution, 2+1
    Backup is adopted for 4 line card)
    Memory
    DDR667-512S
    Rate is PC667, capability is 512Mbytes, encapsulation is SODIMM200 DDR2 memory
    Service module
    RM7B-4CPOS-OC3H
    MP7500: 4-port 155M CPOS module, 100M SFP module
    RM7B-2CPOS-OC3H
    MP7500:  2-port 155M CPOS module, 100M SFP module
    RM7B-1CPOS-OC3H
    MP7500: 1-port 155M CPOS module, 100M SFP module
    RM7B-4ATM-OC3H
    MP7500: 4-port 155M ATM module, 100M SFP module
    RM7B-2ATM-OC3H
    MP7500: 2-port 155M ATM module, 100M SFP module
    RM7B-1ATM-OC3H
    MP7500: 1-port 155M ATM module, 100M SFP module
    RM7B-32CE1H
    MP7500: 32-port CE1 module
    RM7B-16CE1H
    MP7500: 16-port CE1 module
    RM7B-8CE1H
    MP7500: 8-port CE1 module
    RM7B-32E1H
    MP7500: 32-port E1 module
    RM7B-16E1H
    MP7500: 16-port E1 module
    RM7B-8E1H
    MP7500: 8-port E1 module
    RM7B-2GEH
    Two 1000M Ethernet SFP interface module (you can choose optical or electric module)
    Optical module
    SFP-S2-L03P3
    155M single optical module (transmission distance: 20km, LC interface,
    PECL, wave length 1310nm), suitable for RM7B-1/2/4ATM-OC3H,
    RM7B-1/2/4CPOS-OC3H
    SFP-M2-L03P8
    155M multi-module optical module (transmission distance: 2km, LC interface, PECL, wave length: 850nm), suitable for RM7B-1/2/4ATM-OC3H, RM7B-1/2/4CPOS-OC3H
    SFP-S2-L24P3
    1.25G single optical module (transmission distance: 2km, LC interface, PECL, wave length: 1310nm), suitable for RM7B-2GEH module
    SFP-M1-L24P8
    1.25G multi-module optical module (transmission distance: 550m, LC interface, PECL, wave length: 850nm), suitable for control card module, RM7B-2GEH
     
     

    Typical Applications

     
    Data Core Aggregation Solution
     
    The MP7500 series router supports WAN core aggregation layer by powerful data aggregation capability.
     
     
    The user adopts MP7500 router for downlink aggregation by 20GE interface or 4GE+32 155M interfaces.
     

    Large Office Core Aggregation Platform
     
    The MP7500 series router offers powerful aggregation capability, capacity, performance and function. 
     
     
    The user adopts MP7500 router with 155M ATM/CPOS optical interface making the core aggregation network much simpler and easier.

    Dual-router in Single Box: Core Aggregation Platform
     
     
    One dual-control MP7500 router can be configured as two independent single control routers to realize dual-link dual-redundancy and load balance.

    MPLS P or PE Equipment
     
     
    MP7500 router supports MPLS VPN function, which can be used as PE and P equipment. In MPLS VPN network, Router PE operates MPLS and router PE connects to VPN via VRF.
     
    MP-IBGP functions among PE routers and proceeds with VPN-routing. This operation makes the interconnection between CE equipment and downlink equipment. Different CE equipment separates from access equipment of VPN to realize much secure VPN. 
     
     
  • Print this page    E-mail this page
Copyright 1993-2008 Maipu Communication Technolog Co., Ltd. All rights reserved