• MyPower S4100 Series Gigabit L3 Routing Switch

  • MyPower S4100 series Gigabit convergence routing switch is a new multi-service and high-performance desktop L2/L3 Ethernet switch developed by Maipu. It is applied in enterprise network center LAN and district access of IP MAN, and provides stable, reliable and secure high-performance L2/L3 switching services for NGN. It includes MyPower S4152F, MyPower S4128F, MyPower S4152E, MyPower S4128E, and MyPower S4126E models.
    • MyPower S4152F provides 48 Gigabit electric ports, four Gigabit SFP optical interfaces, and two extend slots. It can support 10G interface module.
    • MyPower S4128F provides 24 Gigabit electric ports, 4 Gigabit SFP optical interfaces, and 2 extend slots. It can support 10G interface module.
    • MyPower S4152E provides 48 100M electric ports, 2 Gigabit electric ports and 2 Gigabit Combo interfaces (RJ45+SFP).
    • MyPower S4128E provides 24 100M electric ports, 2 Gigabit electric ports and 2 Gigabit Combo interfaces (RJ45+SFP).
    • MyPower S4126E provides 24 100M electric ports and 2 extend slots. It can support Gigabit interface module.
    MyPower S4100 series Gigabit convergence routing switch can realize the forwarding of line rate Ethernet data frames at the second layer, which is similar to common Ethernet switches. It can realize L3 line rate forwarding of IP packets, and has QoS and multicast capability. It can perform the L4-L7 ACL filtering on packets according to user definitions and combine with 802.1x authentication protocol to meet the security requirements of users.
    It can also meet the requirements of the enterprise network video and audio data with high priorities and other specified data for routing switches. It can adapt well to the typical applications that current enterprise networks need to use VLAN to separate WANs and each VLAN needs high-speed forwarding data. It can converge the data and transmit it to the core network. It can provide low-cost, high-performance, strong-expansibility and simple-management solutions for enterprise network centers and IP MAN district access.
    MyPower 4100 series Gigabit L3 routing switch
     
     

    Key Features

     
    Supports L2/L3 protocols
    It provides STP/RSTP, Link-Aggregation, VLAN, RIP, OSPF, VRRP/VBRP, DVMRP, and PIM
     
    Flexible VLAN separation function
    It supports 4094 802.1Q VLANs, SuperVlan, and GVRP dynamic VLAN protocol to make that different services and users cannot access each other, ensure the confidentiality of service data, improve the security of the whole network system, and save the network bandwidth.
     
    Perfect security policy
    It provides various security policies such as user authority/identity authentication, port security, port rate limitation, port monitoring, address filtering, loopback check, and 802.1X authentication; provides various protect mechanisms for user access and network security.
     
    Powerful access control capability
    It supports L2-L7 ACL access control. It can classify data flow according to source destination MAC address, source destination IP address, UDP/TCP port number, and IP protocol type, set access control rules according to data classification, that is, set permit or deny, and then apply the rules to VLANs or physical ports.
     
    Rich QoS mechanisms
    It provides up to 8 QoS queues, and supports QoS modes such as DSCP/TOS/802.1P, and priority queue scheduling arithmetic such as SP, SRR, WRR, WFQ, and mixed scheduling. It can realize QoS functions such as port rate limitation and traffic shaping and meet the requirements of customer network for data processing priorities.
     
    Comprehensive network management
    It provides SHELL, TELNET, WEB, SNMP,third-party software to realize across-platform and large-scale network management and friendly man-machine interface, and provide powerful support for users to manage devices and control network status.
     
    100M and Gigabit extending
    MyPower S4152F/4128F supports 100M interface and MyPower S4152E/MyPower S4126E supports Gigabit electric port or optical port to provide extending space for user 100M or Gigabit inter-connection.
     

    Technical Specifications

    Product Features
    MyPower S4152F
    MyPower S4128F
    MyPower S4152E
    MyPower S4128E
    MyPower S4126E
    Product Configuration
    Device Structure
    Desktop
    Physical port
    48 RJ45 10/100/1000M Base-T/TX Ethernet ports + four 10/100/1000M SFP interfaces
    24 RJ45 10/100/1000M Base-T/TX Ethernet port + four 1 SFP interfaces
    48 RJ45 10/100M Base-T/TX Ethernet ports + two 10/100/1000M electric ports +two 10/100/1000M Combo (RJ45+SFP) interfaces
    24 RJ45 10/100M Base-T/TX Ethernet ports + two 10/100/1000M electric ports +two 10/100/1000M Combo (RJ45+SFP) interfaces
    24 RJ45 10/100M Base-T/TX Ethernet ports
    Extension slot
    Two 10G extension slots and each slot has a 10G port to support.
    Two 10G extension slots and each slot has a 10G port to support.
    No
    No
    Two Gigabit electric/optical extension slots and each slot has two Gigabit ports to support.
    Console port
    1
    Outband Ethernet port
    1
    Performance
     
    Memory 

     128M

     128M

     128M

     128M

     128M

    Flash 

     16M

     16M

     16M

     16M

     16M

    Backplane bandwidth
     
    512Gbps
    416 Gbps
    52.8Gbps
    38.4Gbps
    38.4Gbps
    Switching capability
    256Gbps
    208Gbps
    26.48Gbps
    19.2Gbps
    19.2Gbps
    Packet forwarding rate
    262Mpps
    191Mpps
    13.2Mpps
    9.6Mpps
    9.6Mpps
    VLAN
    4094 (1-4094)
    Power-off auto recovery
    Yes
    Grounding
    Yes
    Anti-static
    Yes
    Lightning strike
    Anti-lightning strike
    Average no-fault time
    80000 hours
    Standards and protocols
    L2 protocol
    802.1X, VLAN, PVLAN, STP, RSTP, MSTP, port mirroring, IGMP Snooping, GVRP, broadcast storm control, AAA, port binding, address filtering, IP-based filtering, MAC-based ACL, MAC+IP-based ACL, and super-long Jumbo Frame
    L3 protocol
    Static route,  RIPv1/v2, OSPF, BGP4, IGMP, PIM-SM, PIM-DM, MBGP, VRRP
    Upper layer application
    HTTP  TELNET  FTP/TFTP  DHCP/DHCP Relay  SNMP V1/V2/V3  RMON 1/2/3/9  SNTP
    Security mechanism
    SSH, ACL flow filtering mechanism, ACL,  SNMPv3,  Radius, user grading login authentication, accesstable host access control, data log, IP address/VLAN ID/MAC address/port combining binding, packet filtering, packet filtering of packets at application layer
    Network management interface
    SHELL,  WEB,  TELNET, network management software, third-party software
    QoS
    Diff-serv/QOS, traffic monitoring CARSP, WRR, SP+WRR queue scheduling arithmetic 802.1P/DSCP/TOS
    IEEE
    IEEE 802.3 10BASE-T   IEEE 802.3u 100BASE-TX/FX
    IEEE 802.3z 1000BASE-SX  IEEE 802.3ab 1000BASE-T
    IEEE 802.3ad Link Aggregation  IEEE 802.3x Flow Control
    IEEE 802.1D STP  IEEE 802.1Q Virtual LAN  IEEE 802.1P Tag priority  IEEE 802.1W RSTP  802.1X  802.3ae 10GBASE  802.1ad Q in Q
    Physical index
    Dimension (W x D x H)
    440mm x 415mm x 44mm
    440mm x 415mm x 44mm
    440mm x 230mm x 44mm
    440mm x 230mm x 44mm
    444mm x 380mm x 44.5mm
    Power supply
    Input voltage (AC)
    100-240V, 50-60Hz
    Input voltage (DC)
    RPS(12V)
    -36~-72V
    Power consumption (MAX)
    120W
    80W
    54W
    35W
    40W
    Environment
    Temperature
    0-45oC
    Humidity
    10-90% Non-condensing
     

    Order Information

    Product
    Description
    MyPower S4152F/MyPower S4128F
    MyPower S4152F -AC
    10G IPv6 routing switch (48 10/100/1000Base-T, 4-port SFP interface, 2 10G extension slots), AC
    MyPower S4128F-AC
    10G IPv6 routing switch (24 10/100/1000Base-T, 4-port Gigabit SFP interface, 2 10G extension slots), AC
    SM41F-1XFP
    1-port 10G module (XFP interface, fit for MyPower S4128F/4152F
    SFP/XFP interface module
    SFP-M1-L24P8
    1.25G multi-mode optical module (550m transmission distance, LC interface, PECL interface level, and 850nm wavelength)
    SFP-S2-L24P3
    1.25G single-mode optical module (20km transmission distance, LC interface, PECL interface level, and 1310nm wavelength)
    SFP-GT
    1000M SFP interface card module, RJ-45 interface (fit for 6808, 6804, 4152F, 4128F, 4152E, and new 3026G)
    XFP-M1-L192P8
    10G XFP multi-mode fiber interface card module (850nm, MMF 32/85m, 2000MHz/km MMF 300 m), LC interface (fit for 6808, 6804, 4152F, 4128F)
    XFP-S1-L192P3
    XFP-LR 10GBase-LR XFP single-mode fiber interface card module (1310nm, SMF, 10km), LC interface (fit for 6808, 6804, 4152F, 4128F)
    MyPower S4152E/MyPower S4128E
    MyPower S4152E-AC
    Gigabit L3 routing switch (48-port 10/100Base-T, two 10/100/1000Base-T, 2-port Gigabit Combo (SFP/GT) interface), AC
    MyPower S4128E-AC
    Gigabit L3 routing switch (48-port 10/100Base-T, two 10/100/1000Base-T, 2-port Gigabit Combo (SFP/GT) interface), AC
    MyPower S4126E
    MyPower S4126E-DC
    24 100M electric port, DC power supply (including 2 Gigabit extension slots)
    MyPower S4126E-AC
    24 100M electric port, AC power supply (including 2 Gigabit extension slots)
    SM4126E-2GEF
    2-port Gigabit optical extension card (used with SFP module
    SM4126E-2GET
    2-port Gigabit electric extension card (RJ45 interface)
    SFP interface module
    SFP-M1-L24P8
    1.25G multi-mode optical module (550m transmission distance, LC interface, PECL interface level, and 850nm wavelength)
    SFP-S2-L24P3
    1.25G single-mode optical module (20km transmission distance, LC interface, PECL interface level, and 1310nm wavelength)
  • Print this page    E-mail this page
Copyright 1993-2008 Maipu Communication Technolog Co., Ltd. All rights reserved