MyPower S6800-4/S6800-8 series switch is a high performance chassis switch with four or 10 slots. It works in single or redundant management module mode. It can provide up to 16 10G ports and 192 GE ports with wire-speed forwarding capability.With redundant power supply, fans and management modules, MyPower S6800-4/S6800-8 series ensures continuous operation. It is a fully redundant system. All parts are hot swappable, which can be added or exchanged without interrupting the whole system.The switch is ideal for the core or aggregation layer of government and enterprise networks.
Key Features
Performance & scalability
MyPower S6800 series enterprise class 10GE core routing switch comprises two models -- MyPower S6800-4 and MyPower S6800-8. MyPower S6800-4 supports up to six 10G ports, 48 Gigabit ports and 48 10/100 ports. MyPower S6800-8 supports up to 16 10G ports or 192 Gigabit ports providing high flexibility and high port density.
10G modules support one or two ports for downlink to L3 Gigabit distribution layer switches or L2 Gigabit switches aggregating them to the core layer and preventing port bottlenecks in Gigabit switches. The optional 10Gigabit Ethernet XFP transceivers can be chosen for different distance fiber uplinks.
Redundant management modules ensure availability of a master controller for network control at any time.
Every module is hot swappable ensuring continued operation of the system while adding or removing a module.
Firmware & configuration are automatically upgraded from master to slave management module.
Intensive protocol support is included for MPLS, MPLS-VPN, MPLS-TE and IPv6 policy routing ensuring future investment protection.
Continuous Availability
IEEE 802.1w Rapid Spanning Tree Protocol provides a loop free network and redundant links to the core network with rapid convergence.
IEEE 802.1s Multiple Spanning Tree Protocol runs STP per VLAN base providing Layer 2 load balance on redundant links.
IEEE 802.3ad Link Aggregation Control Protocol (LACP) increases bandwidth by automatically aggregating several physical links together as a logical trunk and providing load balance and fault tolerance for uplink connections.
IGMP snooping prevents flooding of IP multicast traffic, and limits bandwidth intensive video traffic to only the subscribers.
L3 Features
MyPower S6800-4/S6800-8 series delivers high-performance hardware based IP routing.
RIP V1/V2 and OSPF V2 supported.
DVMRP, PIM-DM Multicast Routing Protocols send IP multicast traffic from one subnet to another.
VRRP ensures reliability of the network.
Comprehensive QoS
Eight egress queues per port enable differentiated management of up to eight traffic types.
Traffic is prioritized according to 802.1p, DSCP, IP precedence and TCP/UDP port number, giving optimal performance to real-time applications such as voice and video.
Bidirectional rate limiting, per port or traffic class, preserves network bandwidth and allows full control of network resources.
Enhanced Security
IEEE 802.1X port-based access control ensures all users are authorized before being granted access to the network.
Access Control Lists (ACLs) can be used to restrict access to sensitive network resources by denying packets based on L2/L3/L4 headers.
SSL, Web Management Encryption, RADIUS and TACACS+ authentication protect data communication and ensure data privacy.
Simple Management
Industry standard Command Line Interface (CLI) via console port or Telnet can be used for switch management.
Embedded user-friendly web interface helps users quickly and simply configure switches.
Backup and restore Firmware and configuration files via TFTP.
Technical Specifications
|
Attributes |
MyPower S6800-4 |
MyPower S6800-8 |
|
Slot |
4 |
10 |
|
Port |
10/100/1000BASE-T: 48 at most
1000Base-SX: 48 at most 1000Base-LX: 48 at most 10/100BASE-T: 48 at most
10G: 6 at most |
10/100/1000BASE-T: 192 at most 1000Base-SX: 192 at most 1000Base-LX: 192 at most 10/100BASE-T: 192 at most
10G: 16 at most |
|
Backplane Bandwidth |
752Gbps |
1.44Tbps |
|
Switching Capacity |
376Gbps |
768Gbps |
|
Full-mesh Switching Capacity |
80Gbps |
320Gbps |
|
Forwarding Rate |
188Mpps |
572Mpps |
|
MAC Table |
16K |
16K |
|
VLAN Table |
4K |
4K |
|
Routing Table |
64K |
64K |
|
Features |
|
L2 Features |
IEEE802.3(10Base-T)
IEEE802.3u(100Base-TX)
IEEE802.3z(1000BASE-X)
IEEE802.3ab(1000Base-T)
IEEE802.3ae(10GBase)
IEEE802.1Q(VLAN)
IEEEE802.1d(STP)
IEEEE802.1W(RSTP)
IEEEE802.1S(MSTP)
IEEE802.3ad(LACP)
Port mirroring, IGMP Snooping,
QinQ, GVRP, VLAN, PVLAN, SuperVLAN, Broadcast Storm Control
Support port-based 802.1Q, 4096 VLAN |
|
L3 Features(v4) |
IP(IP support both of IPv4 and IPv6)
Static Routing, RIPv1/V2, support MD5 authentication
OSPFv2, BGP4, LPM Routing
Policy based Routing(PBR), VRRP, HSRP, IGMP v1/v2/v3, DVMRP, PIM-DM, PIM-SM, PIM-SSM, ARP, ARP Proxy |
|
IPv6 |
ICMPv6, ND, RIPng, OSPFv3, BGP4+, PIM-SM/DM for IPv6, MLDv1/v2, 6 to 4 Tunnels, configured Tunnels, ISATAP |
|
MPLS |
MPLS,MPLS VPN,MPLS TE |
|
QoS |
8 hardware queues per port
Supports traffic classification based on IEEE 802.1p, ToS, port and DiffServ
Supports SP, WRR.SWRR
Supports Traffic Shaping
Supports PRI Mark/Remark |
|
ACL |
Supports standard and expanded ACL,
Supports IP ACL and ACL, MAC ACL, IP-MAC ACL based on IP subnet
Supports ACL based on source/definition IP, MAC, L3 IP, TCP/UDP port number, IP PRI(DSCP, ToS, Precedence), VLAN, Tag/Untag, CoS |
|
ACL-X |
Supports time-based security auto-negotiation
ACL rules can be configured to port, VLAN, VLAN routing interfaces
Can be used for QoS classification |
|
Anti-Attack and Security |
S-ARP: ARP inspection, defense ARP-DOS attack and address clone
Anti-Sweep: prevent pingSweep
S-ICMP: resist PING-DOS attack, ICMP unreachable attack
S-Buffer: prevent DDOS attack
Switch engine CPU protection
Key message priority: secure processing of key legal messages
Port credit: inspect illegal DHCP Server, Radius Server. Connection via credit port only
Advanced LPM: filter "Bluster", "zero day" and "SQL slammer warm"
Support URPF, avoid IP address clone
All the above technologies efficiently prevent various DOS attack (e.g. ARP, Synflood, Smurf, ICMP attack), support ARP monitoring, defense Worm, Bluster, check sweep and raise alarm. |
|
Reliability and Redundancy Balance |
Supports MVTE, VLAN based traffic balance
Supports shift between main/backup, all hot-swappable
Supports HSRP, VRRP, LACP load balance
Supports Firmware & Config dual fault tolerance backup
Redundant power supply, power load balancing |
|
DCSCM |
Supports multicast source control, resist illegal multicast source
Supports multicast user control |
|
DCSCM and Radius linkage |
Supports |
|
DHCP |
Supports Client, Relay
Internal DHCP Server, |
|
Users Access |
Supports IEEE 802.1x |
|
AAA Authentication |
Supports RADIUS |
|
Power Saving Technology |
Supports, reduces power consumption, improves cooling & reliability |
|
Management |
|
Configuration & Management |
Supports CLI, supports Console (RS-232), supports Telnet
Supports SNMPv1/v2/v3,
Supports MIB , support Trap
Supports RMON 1, 2, 3, 9
Supports Security IP administration |
|
SysLog |
Supports. records events to NVRAM, FLASH, RAM, Telnet, SSH Console, Syslog server |
|
NMS |
Strict access control through ACL |
|
Supervision and Trouble Shooting |
Supervise abnormity of task, memory, CPU, stack, switch chip, temperature and raise alarm |
|
Environment |
|
Dimension(W x D x H) |
445mm*421mm*266mm |
436mm*478mm*797mm |
|
Relative Humidity |
10%~90%, non-condensing |
|
Operating Temperature |
0oC~40oC |
|
Power |
AC: Input 200~240V, 50~60 Hz;
DC: Input -36V~ -72V, Output 12V/25A, 5V/10A |
AC: Input 90~260V, 50~60 Hz:
DC: Input -36V~ -72V: Output 12V/25A, 5V/10A |
|
Power Consumption |
<=300W |
<=600W |
Ordering Information
|
Products |
Description |
|
MyPower S6800-4 |
4-slot core routing switch chassis (including 2 power supply slots, 1+1 redundancy, 1 AC Power supply, 1 hot-swappable fan module, not including management module) |
|
SM6800-4-AC |
220V AC Power Supply (400W) for MyPower S6800-4 |
|
SM6800-4-MPU-12GEFH |
MyPower S6800-4 control card, including 12-port 1000Base-X (SFP) GE interface supports hot-swappable |
|
SM6800-4-MPU-4GEF24FETH |
MyPower S6800-4 control card including 24-port 10/100BaseTX FE interface and 4-port GE Combo (SFP/GT) interface, supports hot-swappable |
|
|
|
MyPower S6800-8 |
10-Slot Core Routing Switch Chassis (including 3 power supply slots, 1+1 redundancy, 1 AC Power Supply, 2 hot-swappable fan module, not including management module) |
|
SM6800-8-AC |
220V AC power supply module (600W) suitable for MyPower S6800-8 |
|
SM6800-8 -MPUH |
MyPower S6800-8 control card, support hot-swappable |
|
SM68-12GETH |
12-port 10/100/1000Base-T GE interface module, support hot-swappable (suitable for S6800-8/6800-4) |
|
SM68-12GEFH |
12-port 1000Base-X (SFP) GE interface module, support hot-swappable (suitable for S6800-8/6800-4) |
|
SM68-4GE24FETH |
24-port 10/100BaseTX FE interface and 4-port GE Combo (SFP/GT) interface module, support hot-swappable (suitable for S6800-8/6800-4) |
|
SM68-8GE16GEFH |
16-port 1000Base-X (SFP) + 8-port GE Combo (SFP/GT) interface module, IPv6
Wire speed based on ASIC, supports hot-swappable (suitable for S6800-8/6800-4) |
|
SM68-2XFP8GE16GEFH |
2-port 10GE (XFP) + 16-port 1000Base-X (SFP) + 8-port GE Combo (SFP/GT)
Interface module, IPv6 Wire speed based on ASIC supports hot-swappable (suitable for S6800-8/6800-4) |
|
SM68-12GE12GETH |
12-port 10/100/1000Base-T+12-port GE Combo (SFP/GT) interface module, IPv6 Wire speed based on ASIC, supports hot-swappable (suitable for S6800-8/6800-4) |
|
SM68-2XFP12GE12GETH |
2-port 10GE (XFP) + 12-port 10/100/1000Base-T + 12-port GE Combo(SFP/GT) interface module, IPv6 Wire speed based on ASIC, supports hot-swappable (suitable for S6800-8/6800-4) |
|
SM68-48GETH |
48 -port 10/100/1000Base-T GE interface module supports hot-swappable (suitable for S6800-8/6800-4) |
|
SFP-M1-L24P8 |
1.25G multiple optical module (transmission distance 550m, LC interface, PECL interface electric level, wave length 850nm) |
|
SFP-S2-L24P3 |
1.25G single optical module (transmission distance 20km, LC interface, PECL interface electric level, wave length 1310nm) |
|
SFP-S4-L24P5 |
1.25G single optical module (transmission distance 40km, LC interface, PECL interface electric level, wave length 1550nm) |
|
SFP-S8-L24P5 |
1.25G single optical module (transmission distance 80km, LC interface, PECL interface electric level, wave length 1550nm) |
|
SFP-S12-L24P5 |
1.25G single optical module (transmission distance 120km, LC interface, PECL interface electric level, wave length 1550nm) |
|
SFP-GT |
1000M SFP interface card module, RJ-45 interface |
|
XFP-M1-L192P8 |
10G XFP multi-module fiber interface card module (850nm, MMF 32/85m, 2000MHz/km MMF 300m), LC interface |
|
XFP-S1-L192P3 |
XFP-LR 10GBase-LR XFP single mode fiber interface card module (1310nm, SMF, 10km), LC interface |
|
XFP-S4-L192P5 |
XFP-ER 10GBase-ER XFP single mode fiber interface card module (1550nm, SMF, 40km), LC interface |
|
XFP-S7-L192P5 |
XFP-ER 10GBase-ER XFP single mode fiber interface card module (1550nm, SMF, 70km), LC interface |
Print this page 
E-mail this page