Maipu PU2300-1G GPON SFU
Maipu PU2300-1G GPON SFU is designed for telecom operators FTTO (office), FTTD (Desk) ,FTTH(Home) broadband access, SOHO broadband access, video surveillance scenario, Which adopt mature and stable, cost-effective GPON technology, following ITU-TG.984.x and related standards, providing high reliability, easy management, flexible configuration and advanced quality of service (QoS) to meet customer requirement.
PU2300-1G provides 1*GPON Port,1*GE Port.
(Note: The product information may not be latest. For the latest, please contact overseas@maipu.com)
Product Features
Panel lights & Interface Description
LED | Mark | Color | Status | Description |
system | SYS | Green | On | Device is powered on and starting. |
Blink | Device is running normally. | |||
Off | Device is powered off. | |||
Optical signal state | REG | Yellow | Blink | Device is not registered to the PON system. |
Green | Blink | Device is being registered. | ||
Green | On | Device is registered to the PON system. | ||
Interface | LINK/ACT | Green | On | Port is connected properly . |
Off | Port connection exception or not connected. | |||
Blink | Port is sending or/and receiving data. |
Port Type | Function |
PON | Connect PON port with internet by SC/UPC type, single mode optical fiber cable. |
LAN | Connect device with ethernet port by RJ-45 cat5 cable. |
RST | Press down reset button and keep1-5seconds to make the device restart and recover from the factory default settings. |
DC12V | Connect with power adapter. |
Product Specifications
Hardware Specification | |
PON interface | GPON Class B+ |
Wavelength: Tx1310nm, Rx 1490nm | |
SC/UPC connector | |
Receiving saturation: ≥-8dBm | |
Receiving sensitivity: ≤-28dBm | |
Transmitting optical power: 0~+4dBm | |
Transmission distance: 20KM | |
LAN interface | 1 x 10/100/1000Mbps auto adaptive Ethernet interfaces.10/100/1000M Full/Half, RJ45 connector |
LED | Status of REG、SYS、LINK/ACT |
Operating condition | Temperature: -30℃～+70℃ |
Humidity: 10%～90%（non-condensing） | |
Storing | Temperature : -30℃～+70℃ |
condition | Humidity :10%～90%（non-condensing） |
Power supply | DC 12V/0.5A |
Power consumption | ≤4W |
Dimension | 82mm×82mm×25mm（L×W×H） |
Net weight | 85g |
Software Key Feature | |
Basic | Support MPCP discover & register |
Support authentication Mac/Loid/Mac + Loid | |
Support Triple Churning | |
Support DBA bandwidth | |
Support auto-detecting, auto-configuration, and auto firmware upgrade | |
Support authentication SN/Psw/Loid/Loid+Psw | |
Software mode | Bridging mode and Routing mode. |
Abnormal protection | Detecting Rogue ONU |
Security | DDOS, Filtering Based on ACL/MAC/URL. |
Alarm | Support Port Loop Detect |
Support Eth Port Los | |
LAN | Support Port rate limiting |
Support Loop detection | |
Support Flow control | |
Support Storm control | |
VLAN | Support VLAN tag mode |
Support VLAN transparent mode | |
Support VLAN trunk mode (max 8 vlan) | |
Support VLAN 1:1 translation mode (max 8 vlan) | |
Auto VLAN detection | |
Multicast | Support IGMPv1/v2 |
Support IGMP Snooping | |
Max Multicast vlan 8 | |
Max Multicast Group 64 | |
QoS | Support 4 queues |
Support SP and WRR | |
Support 802.1P | |
Management | Support CTC OAM 2.0 and 2.1 |
Support ITUT984.x OMCI | |
Support WEB/TELNET/CLI | |
Support TR069 | |
Order Information
Product model | Product specification |
PU2300-1G | GPON SFU, 1*GPON Port and 1*GE Port |