Maipu PU2300-1G GPON SFU
Maipu PU2300-1G GPON SFU is designed for telecom operators FTTO (office), FTTD (Desk) ,FTTH(Home) broadband access, SOHO broadband access, video surveillance scenario, Which adopt mature and stable, cost-effective GPON technology, following ITU-TG.984.x and related standards, providing high reliability, easy management, flexible configuration and advanced quality of service (QoS) to meet customer requirement.
PU2300-1G provides 1*GPON Port,1*GE Port.
(Note: The product information may not be latest. For the latest, please contact overseas@maipu.com)
Product Features
Panel lights & Interface Description
|
LED |
Mark |
Color |
Status |
Description |
|
system |
SYS |
Green |
On |
Device is powered on and starting. |
|
Blink |
Device is running normally. |
|||
|
Off |
Device is powered off. |
|||
|
Optical signal state |
REG |
Yellow |
Blink |
Device is not registered to the PON system. |
|
Green |
Blink |
Device is being registered. |
||
|
Green |
On |
Device is registered to the PON system. |
||
|
Interface |
LINK/ACT |
Green |
On |
Port is connected properly . |
|
Off |
Port connection exception or not connected. |
|||
|
Blink |
Port is sending or/and receiving data. |
|
Port Type |
Function |
|
PON |
Connect PON port with internet by SC/UPC type, single mode optical fiber cable. |
|
LAN |
Connect device with ethernet port by RJ-45 cat5 cable. |
|
RST |
Press down reset button and keep1-5seconds to make the device restart and recover from the factory default settings. |
|
DC12V |
Connect with power adapter. |
Product Specifications
|
Hardware Specification |
|
|
PON interface |
GPON Class B+ |
|
Wavelength: Tx1310nm, Rx 1490nm |
|
|
SC/UPC connector |
|
|
Receiving saturation: ≥-8dBm |
|
|
Receiving sensitivity: ≤-28dBm |
|
|
Transmitting optical power: 0~+4dBm |
|
|
Transmission distance: 20KM |
|
|
LAN interface |
1 x 10/100/1000Mbps auto adaptive Ethernet interfaces.10/100/1000M Full/Half, RJ45 connector |
|
LED |
Status of REG、SYS、LINK/ACT |
|
Operating condition |
Temperature: -30℃～+70℃ |
|
Humidity: 10%～90%（non-condensing） |
|
|
Storing |
Temperature : -30℃～+70℃ |
|
condition |
Humidity :10%～90%（non-condensing） |
|
Power supply |
DC 12V/0.5A |
|
Power consumption |
≤4W |
|
Dimension |
82mm×82mm×25mm（L×W×H） |
|
Net weight |
85g |
|
Software Key Feature |
|
|
Basic |
Support MPCP discover & register |
|
Support authentication Mac/Loid/Mac + Loid |
|
|
Support Triple Churning |
|
|
Support DBA bandwidth |
|
|
Support auto-detecting, auto-configuration, and auto firmware upgrade |
|
|
Support authentication SN/Psw/Loid/Loid+Psw |
|
|
Software mode |
Bridging mode and Routing mode. |
|
Abnormal protection |
Detecting Rogue ONU |
|
Security |
DDOS, Filtering Based on ACL/MAC/URL. |
|
Alarm |
Support Port Loop Detect |
|
Support Eth Port Los |
|
|
LAN |
Support Port rate limiting |
|
Support Loop detection |
|
|
Support Flow control |
|
|
Support Storm control |
|
|
VLAN |
Support VLAN tag mode |
|
Support VLAN transparent mode |
|
|
Support VLAN trunk mode (max 8 vlan) |
|
|
Support VLAN 1:1 translation mode (max 8 vlan) |
|
|
Auto VLAN detection |
|
|
Multicast |
Support IGMPv1/v2 |
|
Support IGMP Snooping |
|
|
Max Multicast vlan 8 |
|
|
Max Multicast Group 64 |
|
|
QoS |
Support 4 queues |
|
Support SP and WRR |
|
|
Support 802.1P |
|
|
Management |
Support CTC OAM 2.0 and 2.1 |
|
Support ITUT984.x OMCI |
|
|
Support WEB/TELNET/CLI |
|
|
Support TR069 |
|
Order Information
|
Product model |
Product specification |
|
PU2300-1G |
GPON SFU, 1*GPON Port and 1*GE Port |